Press red button and click together four stick segments, trigger handle, and brush-head. Button will pop up to ensure firmly connected.
Remove cap from Easy Clean Pro 22 oz can. Shake the can vigorously before each use. If the can is already in the gadget, remove and shake again.
Insert Resolve® High Traffic Foam into the gadget and rotate clockwise until it gently clicks into the locked position.
HOW TO USE
Resolve® Easy Clean Pro Carpet Cleaner is safe to use on wool, nylon and stain-resistant carpet. Not recommended for use on velvet, silk, vinyl, or leather. Do not use on any surface other than carpets.
Vacuum carpet. Test a hidden area for colorfastness, examine when dry. If color is affected do not use.
Shake can well. Hold can upside down 2 feet above carpet. Spray foam over a 3 square foot area. Using a mop, work foam into the carpet in two directions. Repeat until the area is cleaned. When dry, vacuum thoroughly.
Shake can well before and during use. Hold can upside down 2 feet above carpet. Spray lightly (the carpet color should show through). Allow 15 minutes. Drying time may vary. When dry, vacuum thoroughly.
Look for fabric manufacturer’s cleanability code tag. ONLY use on fabrics coded “WS” or “W.” Blot wet soils with a clean cloth. Shake can well and apply directly to stain 4-6 inches away. Allow to absorb for 3 minutes. Gently blot area with a sponge or cloth. Rub gently if required. Do not overwet fabrics.
Hint: To avoid rings, clean the entire section where soil occurs. Allow fabric to dry thoroughly.
AFTER USE INSTRUCTIONS
To remove the can, rotate counter-clockwise into the unlocked position and gently pull upwards. Replace cap on can for standard use.
To clean the gadget after use, rinse the bristles and brush-head and let dry.